< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1914171349308139&ev=PageView&noscript=1" />
ritop at pharmedi vietnam 2026 what vietnamese pharma labs asked for-1

News

Home >  News

Ritop at Pharmedi Vietnam 2026: What Vietnamese Pharma Labs Asked For

Time: 2026-09-22

Jinhua Ritop Steel Cabinet Co., Ltd. exhibited at Pharmedi Vietnam 2026 in Ho Chi Minh City, 22 to 24 September, at booths C26 and C28. The stand carried a P2 PP fume hood, a drug cabinet and two lab safety cabinets, and the fume hood ran throughout the show so visitors could stand at the sash while the face velocity was measured.

Jinhua Ritop Steel Cabinet booth C26 C28 at Pharmedi Vietnam 2026 in Ho Chi Minh City

Booths C26 and C28 at Pharmedi Vietnam 2026, Ho Chi Minh City, inside the Zhejiang pavilion.

What Ran on the Stand

Product on the stand What visitors could do Where it fits
P2 PP fume hood Watch a live face velocity reading at the sash Acid digestion, trace metal work, strong-acid handling
Drug cabinet Operate the keypad and the two mechanical keys together Hospital pharmacy, clinic and university stores
Industrial safety cabinet Open the self-closing door, check the sump and the flame arresters Flammable liquid storage
Hazardous chemical storage cabinet Compare the phosphated steel body against the PP body Acid and alkali storage

Four laboratory furniture questions kept coming back across the three days.

Why Vietnamese Pharma Buyers Are Refitting Now

The first question was about acid. Quality control laboratories in Vietnam are running more hydrochloric, nitric and hydrofluoric acid digestion than they did five years ago, and the coating on a general-purpose steel fume hood is the first thing to fail under that load: the hood looks fine at handover and blisters along the liner two or three years in.

The second was documentation. A supplier who cannot hand over a material certificate, a test report and a compliant storage arrangement is a risk to the buyer's own audit, not only to the operator, and it changes what a laboratory furniture quotation has to contain.

The third was the controlled drug store. Pharmacies and clinics are being asked to show who opened the drug cabinet and when, which a mechanical lock cannot answer on its own.

The fourth was the room, not the product. Most buyers we met were fitting a complete laboratory rather than replacing one cabinet, and they wanted the PP fume hood, the storage, the all-steel lab bench and the ducting to arrive as one package with one drawing.

The P2 PP Fume Hood: Acid Resistance and Airflow Together

  • A polypropylene chamber, welded as one shell. The working chamber uses 8 to 10 mm polypropylene sheet, cut on CNC and welded into a seamless inner wall. There is no panel joint for acid to creep behind and no coating to blister, which is the point of the PP fume hood for strong-acid work.
  • Face velocity held at 0.3 to 0.5 m/s. A streamlined gas collection chamber behind the baffle keeps airflow even across the opening instead of pulling a fast stream up the center. The design follows the ASHRAE 110 containment approach, and at the show visitors watched the reading at the sash rather than taking our word for it.
  • Control that watches the sash as well as the airflow. The touch controller monitors both, and raises an audible and visual alarm when the sash goes past its working height or the airflow drifts. An optional variable-air-volume mode follows sash position, which our own comparison puts at roughly 30% less energy than a constant-volume fume hood.
P2 PP fume hood shown at Pharmedi Vietnam 2026 with seamless polypropylene chamber

The P2 PP fume hood on the stand: 8-10 mm polypropylene chamber, welded as one seamless shell.

The ductless models and the steel range are listed under Lab Fume Hood.

The Drug Cabinet: Two Keys, Two People, One Log

  • Dual authorization. An electronic code and a mechanical key are linked, and the door opens only when both are presented by two different people, so no single member of staff can reach the contents alone. The cabinet on the stand carried two key cylinders for exactly that reason.
  • Tiered accounts and an opening log. Administrators issue accounts at different authority levels, and every opening is recorded with time and user, which is the record narcotics and psychotropic drug rules ask for.
  • A body that resists force. Double-layer cold-rolled steel welded as one frame, a reinforced door frame, anti-pry hinges and an epoxy powder finish.
  • A movement alarm. A vibration sensor triggers an audible and visual alarm on prying or impact, with an optional network output to a monitoring point.
Drug cabinet with keypad and two mechanical key cylinders at Pharmedi Vietnam 2026

The drug cabinet: a keypad plus two mechanical key cylinders, so two people must open it together.

Industrial Safety Cabinets and Hazardous Chemical Storage

  • Double-wall steel with an air gap. The cavity slows heat transfer and delays flame penetration, and the door returns itself under spring tension so a fire cannot hold it open. The layout follows NFPA 30 and OSHA flammable storage requirements.
  • A spill sump and flame arresters. A one-piece tray in the base holds the contents of a failed container, and both sides carry vents fitted with flame arresters that can be tied into external exhaust.
  • Three-point locking and a conductive finish. The rods engage together, the epoxy coating is antistatic and chemical resistant, and shelves adjust to suit different container heights.
  • Flammable and corrosive storage in one room. The lab safety cabinet and the hazardous chemical storage cabinet are usually quoted together, because the same room holds both, and each needs the right body for its duty.
  • Two bodies for two duties. The lab safety cabinet range is offered with a phosphated steel body for general chemical storage and a one-piece PP body for hydrochloric, nitric and sulfuric acid service, where a coated panel would be the first thing to fail.
Yellow hazardous chemical storage cabinet with keypad lock shown at Pharmedi Vietnam 2026

The hazardous chemical storage cabinet on the stand, with keypad access and hazard labeling.

A hazardous chemical storage cabinet is sized by the volume the room holds, not by the drawing, so the show copies carried both internal layouts. Both sit under Lab Storage Cabinet, with the flammable and gas cylinder cabinets.

All-Steel Lab Benches and the Fit-Out Behind Them

Most of the projects discussed at the show were whole-room fits, so the all-steel lab bench traveled with the storage cabinet range. The all-steel lab bench is the default for general and analytical work: steel frames with adjustable feet, a phenolic worktop, reagent shelves on service posts, and base units with drawers, cupboards and sinks. The same run can be built in PP, stainless steel, steel-wood or wood when the chemistry or the budget calls for it.

Because ventilation and furniture come out of the same group, a turnkey laboratory can be quoted as one package, with the hoods, the storage, the all-steel lab bench and the ducting on one drawing for the contractor, so the fume hood, the lab safety cabinet and the bench arrive on a single delivery. The bench range is listed under All Steel Lab Bench.

What We Left Behind for Vietnamese Buyers

Vietnam is not a market where a catalog alone closes a project, so the support offered at the show ran past the hardware:

  • Local compliance documents. The paperwork Vietnamese laboratories ask for during the approval stage, prepared before the order rather than after it.
  • A full export document set. CO and CQ documents issued with the shipment, so customs clearance does not stall on missing paper.
  • A layout plan. A room-level plan with bench runs, sink positions and hood locations marked, free of charge at quotation stage.
  • Catalogs and case packs. The current product catalog and a pack of completed laboratory projects, including work in the region.
  • Distributor discussions. We are looking for Vietnamese partners who already sell laboratory furniture, and the show was the place to start that conversation. Territory, OEM supply and project pricing can all be discussed.

FAQ

When and where did Ritop exhibit in Vietnam?

Pharmedi Vietnam 2026, 22 to 24 September, at SECC in Ho Chi Minh City, booths C26 and C28, inside the Zhejiang pavilion.

Can the PP fume hood replace a steel one?

For constant strong-acid work, yes, and it removes the recoating cycle. For general chemistry with solvents and light acids, a coated steel fume hood is usually the more economical choice, and both are built in the same workshops.

Does the drug cabinet satisfy narcotics record keeping?

The dual-credential lock, tiered accounts and automatic opening log are designed to give an inspector a complete record of who opened the drug cabinet and when.

Do you supply to Vietnam directly or through a distributor?

Both. Direct projects are quoted with export documentation and shipping to Ho Chi Minh City or Hai Phong, and distributor conversations are open for buyers who prefer a local partner.

Talk to Our Team

If you met us at Pharmedi Vietnam and want the drawing we discussed, send the room dimensions, the chemicals in use and the equipment list, and we will return a configuration, a layout plan and a quotation. Contact our team to start.

Jinhua Ritop Steel Cabinet Co., Ltd. was founded in 2012 and runs five workshops covering 80,000 square meters, with ISO 9001, ISO 14001 and ISO 45001 certification and more than 45 patents. Annual output is stated at 50,000 lab benches, 30,000 fume hoods and 25,000 storage cabinets.

PREV : None

NEXT : Ritop Brings PP Fume Hoods and Drug Cabinets to analytica China 2026

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000